Mailer Wrap Box 3VVL 305x215x100 mm A4

Product description and parameters

Modern one-piece box with solid bottom. The box is suitable for flat items with insertion from the top, where stacking multiple boxes on top of each other is offered. A significant advantage of this type of box is the re-opening and closing.

This is not a gift box, the box is designed for transport and shipping of goods.

But you can also use it as a shipping box or for packing furniture, frames, books and group packing with the possibility of adding other goods. The box is also optimal for smaller winemakers, as an export box for 3-6 bottles.

The box is self-closing, but for greater security it is advisable to secure it with PP tape, adhesive tape, ribbon, etc.

The production options are three-layer B and five-layer EB. The top layers of the boards are kraft.

3 or 5 layers of cardboard?

3VVL🟤B

3VVL🟤B flute (370g/m2) - Type Testliner, 3mm thick, board composition: 120g/m² Testliner , 100g/m² Wellenstoff, 120g/m² Testliner

3VVL🟤B

3VVL🟤B flute (410g/m2) - Type Kraftliner, 3mm thick, board composition: 120g/m² Kraftliner, 120g/m² Wellenstoff, 140g/m² Testliner

 

5VVL🟤BE

5VVL🟤BE flute (640g/m2) - Type Kraftliner, 4mm thick, board composition: 120g/m² Kraftliner, 120g/m² Wellenstoff, 100g/m² Schrenz, 120g/m² Wellenstoff, 120g/m² Testliner

 

5VVL🟤BC

5VVL🟤BC flute (680g/m2) - Type Krafliner, 6mm thick, board composition: 135g/m² Kraftliner, 100g/m² Wellenstoff, 90g/m² Wellenstoff, 100g/m² Wellenstoff, 130g/m² Testliner

3VVL⚪E

3VVL⚪E flute (405g/m2) - Type Kraftliner , 1,3mm thick, board composition: 140g/m² Kraftliner, 100g/m² Wellenstoff, 140g/m² Kraftliner

The range of boxes from BOX48 is made of continuous cardboard, which is folded by 1143 mm (so called 'bigs' are part of the manufactured boxes) on a pallet. Due to the nature of the technology, it is not possible to decide where the big appears on the box.

The strength of the input cardboard can be reduced as it passes through the machine. This reduction in force after passing through the machine does not affect the resistance parameters of the input board.

The input cardboard is actually 6mm thick. After the box is cut, the cardboard is about 4mm thick at the creasing, pressure and feed rollers and cut points. This is due to the technological process and cannot be avoided. In the rest of the area, the cardboard is also 6mm thick outside these mentioned places.

This is not a classic die-cut, where this 'squeezing' of the cardboard does not occur.

This is not a die-cut box making technology, the production has its own specifics and tolerances. Before ordering, please consult our consulting room for information about the technology read our FAQ section.

If you are looking for a box that you plan to use as a gift, consider whether you will be bothered by unaesthetic elements such as bigs, burrs, etc. These elements are part of the box by virtue of the manufacturing technology used. Where the machine picks up the cardboard for formatting, the cardboard may be pinched. These dents are part of the principle of the technology used and are not grounds for complaint.

Tearing of the cardboard if the box is not folded correctly:

This problem is often caused by turning the box so that the kraft surface (darker brown shade) is not on the outside of your box. At that point, you are bending the testliner material (lighter, lower-weight material), which is normally on the inside. If this situation happens to you, we recommend that you unfold the box and double check that you are folding the box from the correct side. If the kraft surface is on the outside, you're done and you'll have a complete box in no time. In case you are not sure about folding the box try our youtube channel. The presence of a tear in the cardboard by poor folding of the box is not a reason for accepting a claim.