Cardboard tube 1188x104x104 mm 3VVL

Product description and parameters

Lid box consisting of two pieces - lid + bottom. The solid, jointless bottom ensures product protection and the double overlapping corrugated cardboard sides provide a superior crumple zone on the sides of your package contents. Due to the double overlapping of the sides, the sealed storage boxes with lids are ideal for transporting your shipment, however, to further secure the contents, it is advisable to use PP tabe, ribbon /tether or adhesive tape. This box is produced using box-on-demand technology from continuous cardboard, which is folded in 1143 mm (the so-called \'bigy\' bends are therefore part of the manufactured boxes) on a pallet. Due to the nature of the technology, it is not possible to decide where the big appears on the box.

Robust packaging can also be used for more fragile products such as glass or ceramic products. Thanks to the two-piece construction, the box can also be used repeatedly. This type of box is often used for transporting furniture, designer furniture and products of various types of craftsmanship. A large box with a lid can then be suitable for larger shipments.

The colour of the storage paper box with lid is brown (the top of the box is covered with kraft paper - kraftliner). You can order white folding paper boxes from 1000 pieces. Please enter your request in the order notes.

If you want a simple shipping package, we recommend using three-ply cardboard (3VVL). If, on the other hand, you prefer strength and compactness of the whole package, use five-layer cardboard (5VVL). We use the EB type of cardboard. You can see the choice of cardboard at the calculator of each box when entering the dimensions. Instructions for assembling the box can be found on our youtube channel.

3 or 5 layers of cardboard?

3 layers

3VVL - B wool, 3mm thick, board composition: 120g/m² Kraftliner, 120g/m² Wellenstoff, 140g/m² Testliner

The strength of the input cardboard may decrease as it passes through the machine. This reduction in force after passing through the machine does not affect the resistance parameters of the input board. More information in the video: https://youtu.be/C9PG3DjGK1s

This is not a die-cut box production technology, the production has its own specifics and tolerances.

5 layers

5VVL - BE wool, thickness 4mm, board composition: 120g/m² Kraftliner, 120g/m² Wellenstoff, 100g/m² Schrenz, 120g/m² Wellenstoff, 120g/m² Testliner

The strength of the input cardboard may decrease as it passes through the machine. This reduction in force after passing through the machine does not affect the resistance parameters of the input board. More information in the video: https://youtu.be/C9PG3DjGK1s

This is not a die-cut box production technology, the production has its own specifics and tolerances.

If you are looking for a box that you plan to use as a gift, consider whether you will not mind unaesthetic elements such as bigs, inequalities, etc. These elements are part of the box by virtue of the manufacturing technology used. Where the machine picks up the cardboard for formatting, the cardboard may be pinched. These dents are part of the principle of the technology used and are not grounds for complaint.

Paperboard tears when the box is not properly folded:

This problem is often caused by turning the box so that the kraft surface (darker brown shade) is not on the outside of your box. At that point, you are bending the testliner material (lighter with a lower grammage) which is normally on the inside. If this situation happens to you, we recommend that you unfold the box and double check that you are folding the box from the correct side. If the kraft surface is on the outside, you're done and you'll have a complete box in no time. In case you are not sure about folding the box try our youtube channel. The presence of a tear in the cardboard due to poor folding of the box is not a reason to accept a claim.