Cardboard folding box F443

Product description and parameters

The paper folding box F443 has a more complex folding design, but thanks to this it has an elegant appearance and a convenient closure when folded. Using this storage paper box expands your packaging options by inserting product from the top and sides. The box is suitable as a shipper packaging but also as a helper in smaller production. This box is manufactured using box-on-demand technology from continuous board, which is folded in 1143 mm (the 'bigy' bends are therefore part of the manufactured boxes) on a pallet. By the nature of the technology, it is not possible to decide where the big appears on the box.

The box is folded by bending the side and centre flaps to a vertical position, then the opposite bottom of the box with the fixing inner flaps is inserted into the intruded space. Now just insert the top part with the front flap inside to close the whole box. Subsequent securing of the entire package is possible e.g. with adhesive tape, PP tape or security adhesive label. Instructions for assembling the box can be found on our youtube channel. You can find the entire range of adhesive tapes in the packaging material section.

3 or 5 layers of cardboard?

3VVL🟤B

3VVL🟤B flute (370g/m2) - Type Testliner, 3mm thick, board composition: 120g/m² Testliner , 100g/m² Wellenstoff, 120g/m² Testliner

3VVL🟤B

3VVL🟤B flute (410g/m2) - Type Kraftliner, 3mm thick, board composition: 120g/m² Kraftliner, 120g/m² Wellenstoff, 140g/m² Testliner

 

5VVL🟤BE

5VVL🟤BE flute (640g/m2) - Type Kraftliner, 4mm thick, board composition: 120g/m² Kraftliner, 120g/m² Wellenstoff, 100g/m² Schrenz, 120g/m² Wellenstoff, 120g/m² Testliner

 

5VVL🟤BC

5VVL🟤BC flute (680g/m2) - Type Krafliner, 6mm thick, board composition: 135g/m² Kraftliner, 100g/m² Wellenstoff, 90g/m² Wellenstoff, 100g/m² Wellenstoff, 130g/m² Testliner

3VVL⚪E

3VVL⚪E flute (405g/m2) - Type Kraftliner , 1,3mm thick, board composition: 140g/m² Kraftliner, 100g/m² Wellenstoff, 140g/m² Kraftliner

If you are looking for a box that you plan to use as a gift, consider whether you will not mind unaesthetic elements such as bigs, inequalities, etc. These elements are part of the box by virtue of the manufacturing technology used. Where the machine picks up the cardboard for formatting, the cardboard may be pinched. These dents are part of the principle of the technology used and are not grounds for complaint.

Paperboard tears when the box is not properly folded:

This problem is often caused by turning the box so that the kraft surface (darker brown shade) is not on the outside of your box. At that point, you are bending the testliner material (lighter with a lower grammage) which is normally on the inside. If this situation happens to you, we recommend that you unfold the box and double check that you are folding the box from the correct side. If the kraft surface is on the outside, you're done and you'll have a complete box in no time. In case you are not sure about folding the box try our youtube channel. The presence of a tear in the cardboard due to poor folding of the box is not a reason to accept a claim.